Skip to main content
Testing. You are viewing the public testing version of GCN. For the production version, go to https://gcn.nasa.gov.
New Announcement Feature, Code of Conduct, Circular Revisions. See news and announcements

GCN Circular 4717

Subject
GRB 060209(?): Swift-BAT detection of a possible burst
Date
2006-02-09T19:44:31Z (18 years ago)
From
Scott Barthelmy at NASA/GSFC <Scott@lheamail.gsfc.nasa.gov>
J. Osborne (U Leicester), S. Barthelmy (GSFC), N. Gehrels (GSFC),
J. Kennea (PSU), H. Krimm (GSFC/USRA), C. Markwardt (GSFC/UMD),
F. Marshall (GSFC), K. Page (U Leicester), D. Palmer (LANL),
T. Sakamoto (GSFC/ORAU), P. Schady (PSU/UCL-MSSL)
on behalf of the Swift team:

At 19:08:55 UT, Swift-BAT triggered and located GRB 060209 (trigger=180931).
The spacecraft slewed immediately.  The BAT on-board calculated location is
RA,Dec 65.454,+58.730d {04h 21m 49s,+58d 43' 47"} (J2000), with an uncertainty
of 3 arcmin (radius, 90% containment, stat+sys).  The TDRSS lightcurve
does not show anything significant (in T-20 to T+128 sec) which is consistant
with a weak short burst and with a cosmic ray shower.  We will not be able
to distinguish these until we get the full data in about an hour.

The XRT began taking data at 19:10:00 UT, 64 seconds after the BAT
trigger.  The XRT on-board centroid algorithm did not find a source in the
image and no prompt position is available.  We are waiting for down-linked
data to detect and determine a position for the source.

UVOT took a finding chart exposure of 200 seconds with the V filter
starting 65 seconds after the BAT trigger.  No afterglow candidate
has been found in the initial data products.  The 2.7'x2.7' sub-image
covers 25% of the BAT error circle.  The typical 3-sigma upper limit
has been about 18th mag.  The 8'x8' region for the list of sources
generated on-board covers 100% of the BAT error circle.  The list
of sources is typically complete to about 18.0 mag.  No correction
has been made for the expected extinction of about 2.9 magnitudes.
Looking for U.S. government information and services? Visit USA.gov