Skip to main content
Testing. You are viewing the public testing version of GCN. For the production version, go to
New Announcement Feature, Code of Conduct, Circular Revisions. See news and announcements

GCN Circular 20140

GRB 161106A: Fermi GBM detection
2016-11-06T20:37:05Z (8 years ago)
Rachel Hamburg at UAH <>
R. Hamburg(UAH), C. Meegan (UAH), and A von Kienlin (MPE)
report on behalf of the Fermi GBM Team:

"At 11:57:53.62 UT on 06 November 2016, the Fermi Gamma-Ray Burst Monitor
triggered and located GRB 161106A (trigger 500126277 / 161106499).

The on-ground calculated location, using the GBM trigger
data, is RA = 202.1, DEC = +64.9, with an uncertainty
of 1.5 degrees (radius, 1-sigma containment,
statistical only; there is additionally a systematic
error which we have characterized as a core-plus-tail model, with 90% of
GRBs having a 3.7 deg error and a small tail suffering a larger than 10 deg
systematic error [Connaughton et al. 2015, ApJS, 216, 32].

The trigger resulted in an Autonomous Repoint Request (ARR)
by the GBM Flight Software owing to the high peak flux
of the GRB. This ARR was accepted and the spacecraft slewed to the GBM
location. The initial angle from the Fermi LAT boresight to
the GBM ground location is 52 degrees.

The GBM light curve consists of a single peak
with a duration (T90) of about 11 s (50-300 keV).
The time-averaged spectrum from T0-0.00 s to T0+16 s is
best fit by a power law function with an exponential
high-energy cutoff.  The power law index is -0.61 +/- 0.02 and
the cutoff energy, parameterized as Epeak, is 125 +/- 2 keV.

The event fluence (10-1000 keV) in this time interval is
(1.34 +/- 0.01)E-05 (erg/cm^2). The 1-sec peak photon flux measured
starting from T0+2.6 s in the 10-1000 keV band
is 16.3 +/- 0.3 ph/s/cm^2.

The spectral analysis results presented above are preliminary;
final results will be published in the GBM GRB Catalog."
Looking for U.S. government information and services? Visit